|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
8700 E. Thomas Road Scottsdale, AZ 85251 Tel: (480) 941-6300 Fax: (480) 947-1503 USB0403C thru USB0424C TVSarray TM Series DESCRIPTION (300 watt) This 4 pin 1 line bidirectional ULTRA LOW CAPACITANCE array is designed for use in applications requiring board level protection from voltage transients caused by electrostatic discharge (ESD) as defined by IEC 1000-4-2, electrical fast transients (EFT) per IEC 1000-4-4 and effects of secondary lightning. These arrays are used to protect 1 discrete line utilizing pins (1,4 and 2,3). The S0T-143 product provides board level protection from static electricity and other induced voltage surges that can damage sensitive circuitry. These TRANSIENT VOLTAGE SUPPRESSOR (TVS) Diode Arrays protect 3.3 Volt components such as DRAM's, SRAM's, CMOS, HCMOS, HSIC, and low voltage interfaces up to 24Volts. FEATURES * * * * * Protects 3.3 up through 24V Components Protects 1 line bidirectional Provides electrically isolated protection SOT-143 Packaging ULTRA LOW CAPACITANCE 5 pF MECHANICAL * * * * Molded SOT-143 Surface Mount Weight: .035 grams (approximate) Body Marked with device marking code Pin #1 defined by DOT on top of package MAXIMUM RATINGS * * * * Operating Temperatures: -55 C to +150 C 0 0 Storage Temperature: -55 C to +150 C Peak Pulse Power: 300 Watts (8/20 sec, Figure 1) Pulse Repetition Rate: <.01% 0 0 0 PACKAGING * * Tape & Reel EIA Standard 481-1-A 13 inch reel 10,000 pieces ELECTRICAL CHARACTERISTICS @ 25 C Unless otherwise specified STAND OFF VOLTAG E VWM VOLTS MAX USB0403C USB0405C USB0412C USB0415C USB0424C U3 U5 U12 U15 U24 3.3 5.0 12.0 15.0 24.0 BREAKDOWN VOLTAGE VBR @1 mA VOLTS MIN 4 6.0 13.3 16.7 26.7 CLAMPING VOLTAGE VC @ 1 Amp (FIGURE 2) VOLTS MAX 8 10.8 19 25 44 CLAMPING VOLTAGE VC @ 5 Amp (FIGURE 2) VOLTS MAX 11 13 26 32 57 STAND OFF CURRENT ID @ VWM A MAX 200 100 1 1 1 CAPACITANCE (f=1 MHz) @0V C pF MAX 5 5 5 5 5 TEMPERATURE COEFFICIENT OF VBR aVBR mV/C MAX -5 3 10 13 30 PART NUMBER DEVICE MARKING NOTE: Transient Voltage Suppression (TVS) product is normally selected based on its stand off Voltage VWM. Product selected voltage should be equal to or greater than the continuous peak operating voltage of the circuit to be protected. MSC0987.PDF ISO 9001 CERTIFIED REV D 1/14/2000 USB0403C thru USB0424C WAVE FORMS Ipp -- Peak Pulse Current -- % Ipp 100 Peak Value -- Ipp 8 X 20 Waveform 50 Half-Value -- Ipp 2 0 0 t 10 td 20 30 t -- Time in microsec FIGURE 1 Peak Pulse Power Vs Pulse Time FIGURE 2 Pulse Wave Form MOUNTING PAD SOT 143 DIMENSIONS INCHES MM MIN MA MIN MA X X .032 .040 0.80 1.00 .040 ----.048 .057 .087 1.00 ----1.20 1.44 2.20 CIRCUIT DIAGRAM DIM A A1 B C D E G H .075 BSC .067 BSC .032 .134 .040 .140 1.90 BSC 1.70 BSC 0.80 3.40 1.00 3.60 DIMENSION A B C C1 D E F G H I J INCHES MIN 0.070 0.047 0.030 0.015 0.110 0.035 0.071 0.0006 0.003 0.018 0.083 MAX 0.080 0.055 0.037 0.020 0.119 0.044 0.079 0.006 0.007 0.023 0.093 MILLIMETERS MIN 1.78 1.20 0.77 0.37 2.80 0.89 1.80 0.013 0.085 0.45 2.10 MAX 2.03 1.40 0.94 0.50 3.04 1.17 2.00 0.05 0.17 0.60 2.50 MSC0987.PDF ISO 9001 CERTIFIED REV D 1/14/2000 |
Price & Availability of USB0403C |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |